WARMDEX® Insulation
Warm Roof Decking Board...
Warmdex Insulation…
Warm Roof Decking Board
WARMDEX®OSB and WARMDEX®FR are the answer to your warm roof build up. Consisting of Insulated Decking Board Manufactured of Kingspan Kooltherm technology with either 22mm OSB4 boarding or 18mm FSC Certified WBP Fire Rated exterior grade plywood.
These are ideally suited for use within your warm roof build up for standing seam roofing including – Rheinzink, VMZinc, KME & Aurubis Copper, Uginox Stainless Steel and Prefa and Falzonal Aluminium plus other manufacturers.
Features & Benefits
• Various thicknesses to meet the U-Value for your specific project
• Solutions for Various Construction Methods
• Can be installed with Ply, Metal or Concrete Support Deck (May need Primer Applied)
• Approved Specialists Contractors throughout the UK and Ireland
• Technical Back-up and Advice Service
• Wind Load Calculations on request
• Durability
Standards and Approvals
Manufactured to the highest standards under a management system certified to:
• IS EN ISO 9001: 2008 (Quality Management Systems; Requirements),
• IS EN ISO 14001: 2004 (Environmental Management Systems, Requirements)
• IS OHSAS 18001: 2007 (Health & Safety Management Systems, Requirements)
Application and Warranty
Manufacturer product warranty of 10 years can be offered if installed with the following products*;
• WARMFAST®VB
• WARMFAST®BM
• WARMDEX®FIX
The Material make up
• The top Layer is 22mm OSB4.
• The core is manufactured with Kingspan’s high performance CFC/HCFC-free, zero ODP Resol foam technology and has a typical density of 35kg/m3 rigid Resol insulation core. Manufactured to BS EN ISO 13166.
• The Bottom Layer is a low emissivity composite foil which is highly resistant to the transmission of water vapour.
Sizes and Thickness
• All boards are 2.4m x 1.2m
.
Thickness
82mm (60+22mm)
102mm (80+22mm)
112mm (90+22mm)
122mm (100+22mm)
142mm (120+22mm)
152mm (130+22mm)
162mm (140+22mm)
172mm (150+22mm)
The Material make up
• The top Layer is 18mm FSC Certified WBP Fire Rated exterior grade plywood.
• The core is manufactured with Kingspan’s high performance CFC/HCFC-free, zero ODP Resol foam technology and has a typical density of 35kg/m3 rigid Resol insulation core. Manufactured to BS EN ISO 13166.
• The Bottom Layer is a low emissivity composite foil which is highly resistant to the transmission of water vapour.
Sizes and Thickness
• All boards are 2.4m x 1.2m
Thickness
88mm (60+18mm)
98mm (80+18mm)
108mm (90+18mm)
118mm (100+18mm)
138mm (120+18mm)
148mm (130+18mm)
158mm (140+18mm)
168mm (150+18mm)
